Question 1

How much does it cost to move a pool table in NYC?

Accepted Answer

Pool table moving in NYC typically costs $350-$550 for a 7ft table, $450-$700 for an 8ft table, and $550-$900 for a 9ft table (local moves with elevator access). Walk-up buildings add roughly $50-$150 per flight of stairs. The price includes full disassembly, slate transport, reassembly, and re-leveling. Refelting, if the existing cloth cannot be reused, adds $280-$500 depending on cloth grade.

Question 2

Can a pool table be moved without taking it apart?

Accepted Answer

No. A slate pool table must be fully disassembled for any move — even to another room in some cases. Moving a slate table assembled can crack the slate (each piece weighs 150-250 lbs), snap the frame joints, and permanently warp the playing surface. Professional movers remove the pockets, rails, felt, and the three slate pieces before the frame is moved, then reassemble and re-level at the destination.

Question 3

How heavy is a slate pool table?

Accepted Answer

A 7ft slate pool table weighs roughly 450-700 lbs, an 8ft table 700-1,000 lbs, and a 9ft tournament table 1,000-1,300 lbs. Most of that weight is the slate playing surface: a standard 1-inch three-piece slate set weighs 450-750 lbs total, with each piece at 150-250 lbs. This is why pool table moves require a trained crew of 2-4 with slate dollies and proper lifting technique — not general labor.

Question 4

How long does a pool table move take?

Accepted Answer

A local NYC pool table move typically takes 3-5 hours end to end: 60-90 minutes for disassembly, transport time between boroughs, and 90 minutes to 2 hours for reassembly and precision leveling. Walk-up buildings, long carries, or a refelt add time. The slate must be shimmed and leveled to within 0.01 inches for true roll, so reassembly is the longest step.

Question 5

Does the felt need to be replaced when moving a pool table?

Accepted Answer

Not always. Felt that was stapled on can often be carefully removed and re-stretched at the destination. Glued felt, older cloth, or worn cloth usually cannot survive removal and should be replaced during the move — the table is already apart, so a refelt costs less than doing it separately later ($280-$500 installed depending on cloth grade, versus a standalone refelt visit).

Question 6

Can pool table movers handle NYC walk-up buildings?

Accepted Answer

Yes, but stairs are the hardest part of any NYC pool table move. Each slate piece (150-250 lbs) is carried individually on a slate dolly or by two crew members with straps. Brownstone staircases in Brooklyn and Manhattan are often 30-36 inches wide with tight turns, which the frame and slate must clear. Expect $50-$150 per flight added to the flat rate, and confirm stair width in advance — a 9ft table frame needs about 36 inches of clearance on turns.

Question 7

Do I need a COI to move a pool table in my NYC building?

Accepted Answer

Most Manhattan doorman and elevator buildings require a Certificate of Insurance (COI) naming the building before movers can work, and many require a service elevator reservation. Licensed pool table movers provide the COI directly to your management company. Reserve the service elevator 1-2 weeks ahead and confirm the elevator cab depth — a three-piece slate set fits in nearly all service elevators, but a one-piece slate (rare, mostly antique tables) may need stair carry or rigging.

Question 8

Can a pool table go in an apartment above the ground floor?

Accepted Answer

Yes. A pool table’s weight is spread across 4-8 legs, so an 8ft table (~1,000 lbs) loads roughly 30-40 lbs per square foot over its footprint — within the 40 lbs/sq ft live-load standard most NYC residential floors are built to. Place the table perpendicular to floor joists where possible. For pre-war buildings or 9ft tournament tables, ask your building management about floor load limits before booking.

Question 9

How much room do I need for a pool table in an NYC apartment?

Accepted Answer

Plan for the table footprint plus cue clearance on all sides. With standard 58-inch cues, a 7ft table (39x78-inch playfield) needs a room of about 13 x 16 feet; an 8ft table needs roughly 13.5 x 17 feet; a 9ft table needs about 14 x 18 feet. Measure before you move — downsizing to a 7ft table, or fitting shorter 48-inch cues along tight walls, is a common NYC compromise.

Question 10

Can regular movers move a pool table?

Accepted Answer

General movers can carry the frame, rails, and legs, but slate handling and reassembly are specialist work. Slate cracks if flexed or dropped even a short distance, seams must be joined with beeswax or seam filler, and the surface must be machine-leveled. If a general crew moves your table, you would still need a billiard technician afterward to level and refelt it — so a specialist pool table move usually costs less in total and carries the insurance for the slate itself.

Table Size	Total Weight	Slate Weight	Local Move (Elevator)	With Walk-Up Stairs
7ft (bar size)	450-700 lbs	~450 lbs (3 pieces)	$350-$550	$450-$750
8ft (home standard)	700-1,000 lbs	~550 lbs (3 pieces)	$450-$700	$550-$950
9ft (tournament)	1,000-1,300 lbs	~750 lbs (3 pieces)	$550-$900	$700-$1,200

Professional Pool Table Movers in NYC — Slate Disassembly, Transport & Precision Re-Leveling

How Much Does Pool Table Moving Cost in NYC? (2026 Pricing)

Get Your Pool Table Moving Price

NYC Pool Table Moving Costs by Table Size

How Professional Pool Table Moving Works

1. Disassembly (60-90 min)

2. Transport

3. Reassembly (90-120 min)

4. Precision Leveling

NYC Building Logistics: What Makes Pool Table Moves Hard Here

Brownstone walk-ups (Brooklyn, Harlem, UWS)

Doorman & elevator buildings (Manhattan, LIC, Downtown Brooklyn)

Floor load: can your apartment take a pool table?

One-piece slate & antique tables

Pool Table Moving FAQs

Related Moving Services

Piano Movers NYC

Movers NYC

Long-Distance Moving

Art & Antique Movers NYC

Gun Safe Movers NYC